How to reduce noise at your Nikon’s high ISO settings

    By | Nikon DSLR Tips | Tutorials | Uncategorized | 08/05/2012 12:34pm
    0 Comments
    How to reduce noise at high ISO settings

    Image copyright Ben Birchall

    Shooting indoor sports action using a fast shutter speed, old, gloomy churches without flash or bright landscapes where you want to slow down the shutter speed to capture movement are just some of the many situations where you will need an extreme ISO to get better results.

    ISO denotes how sensitive an image sensor is. Any change from the manufacturer’s native ISO (the lowest default, which produces the optimum image quality) will have some form of electrical signal modification that results in noise.

    Most Nikon DSLRs have a native ISO of around 100 or 200; beyond that, at the extreme low end of the range, quality isn’t improved. However, some manufacturers offer lower ISO values in the menu, such as ISO50. Others use a decimalised f-stop value to indicate when it falls below the native ISO. Both are great for using wide apertures (for more on apertures, download our free f-stop chart for understanding aperture) or long shutter speeds in bright lighting conditions (see our complete guide to Nikon shutter speed scales).

    When using extreme ISO values above the highest setting, most cameras share the prefix letter H followed by an f-stop value to indicate when the ISO is being ‘pushed’ to the limit. Such images can be very noisy, but will allow you to carry on shooting in very dark conditions.

    How to reduce noise at high ISO settings - Step 1

    Step 1: Go manual
    Turn off any ISO sensitivity control modes that automatically select a suitable ISO depending on the shutter speed and aperture. You should also switch off any Scene modes and select either Manual or 
a semi-automatic exposure mode.

    How to reduce noise at high ISO settings - Step 2

    Step 2: Select the ISO
    Most recent cameras will have a dedicated ISO button that’s located on the camera body. Locate the button on your camera and have a scroll through the ISO values from one end to the other to see if you have the L or H prefix.

    How to reduce noise at high ISO settings - Step 3

    Step 3: Reduce the noise
    Any amplification or reduction of the electrical signal that’s been produced by light falling on the sensor’s CCD will suffer from noise. Dig into your Nikon DSLR’s menu and turn on any in-camera noise reduction for the very best results.

    READ MORE

    99 common photography problems (and how to solve them)
    How to set up your new Nikon DSLR
    12 promises every landscape photographer should make


    Posted on Tuesday, May 8th, 2012 at 12:34 pm under Nikon DSLR Tips, Tutorials, Uncategorized. You can subscribe to comments.

    Tags: , , ,

    Share This Page